SET UP USB DEVICE FOR SWAP MAC MAC OS X
SET UP USB DEVICE FOR SWAP MAC INSTALL
SET UP USB DEVICE FOR SWAP MAC ISO
SET UP USB DEVICE FOR SWAP MAC SERIES

If you will use rEFInd as rEFInd for boot management, disable the GRUB boot manager which Debian configured by resetting the computer's NVRAM (hold Command, Option, P and R when turning on the computer). Other boot managers are available such as GRUB and LiLo, which require configuration to boot OS X. rEFInd works out-of-the-box after installation with OS X and Linux installs on the machine. If you want a more user-friendly boot manager, rEFInd is a boot manager which presents a screen to select which operating system to boot at power on. Some find this a usable way to control booting between OSes. OS X can be booted by holding down the Option key at power on and entering OS X from Apple's Startup Manager. Turning on the computer will start GRUB, and start Debian. On installation, Debian sets GRUB as the default boot manager and boot loader. If you are planning on dual booting OS X and Debian, this is the easiest way to manage this process.

SET UP USB DEVICE FOR SWAP MAC MAC OS X

Debian also configures the computer's firmware to open the GRUB boot manager instead of entering directly into the Mac OS X boot loader.Ī boot manager, on computer start-up, lets the user decide which operating system to load.

SET UP USB DEVICE FOR SWAP MAC INSTALL

In Software Selection screen, you should select a desktop environment, which will be the windowing, graphical user interface for interacting with the operating system.Ĭontinue through the install until complete.ĭebian installs GRUB, a boot manager and loader, on the hard drive's EFI partition. ext4 is a good default for filesystem.Īlso consider creating a partition for exchanging data between Linux and Mac OS X, see Section ''Cross-mount file systems'' below. The Debian OS partition should mount as the system partition in the / location on the filesystem, and the swap space partition should be configured as well. When asked to Partition Disks, configure Debian to use the partitions created previously. The Expert Install provides more options, but are unnecessary for most users.įollow along through the installation screens. When asked, install Debian via the Graphical Install. This will bring up the OS X Startup Manager. Insert the Debian install volume into your computer and hold down the Option key while booting.

SET UP USB DEVICE FOR SWAP MAC ISO

Here are instructions for mounting an ISO image onto a USB stick. Mount the image onto a mountable physical volume (CD, DVD or USB stick). Get the amd64 image which works with Macbook 2007+ architecture. As new Macs don't have an on-board ethernet port, an ethernet-to-thunderbolt adapter will be required and will work during the Debian install process. This works well if you have a wired ethernet connection. Other packages are downloaded as needed from the internet. The network install is a minimal image containing few packages. Get an installer image: To install Debian, you will need an installer image to boot from, either on a CD, DVD, or USB stick.ĭebian offers various installer images. If you experience errors like 'you can't perform this resize unless it has a booter' when attempting to resize the OS X partition, change the volume from CoreStorage to HFS+ Shrink the OS X partition (by default named 'Macintosh HD') and create the Debian OS and Debian swap partitions. Select the hard drive entry, and enter the Partition tab. In the File Menu, select Utilities > Disk Utility. Reboot your computer, holding down Command+R to enter Recovery Mode. Also see the ''Cross-mount file systems'' below. If you would like a shared partition between OS X and Debian, consider creating a partition now. See this table on deciding swap space size. You will shrink the OS X partition, so decide how much space you want to give your OS X and Debian partitions. To run Debian, you will want two partitions: one for the Debian OS, and one for swap space for Debian.

Recovery HD: A 600 MB recovery partition that includes the OS X installer and basic utilities.

OS X: an HFS+ partition that includes OS X and user space.

EFI: a 200 MB partition at the beginning of the disk.

This requires you to set up system with EFI bootloader.Ī clean install of Mac OS X will create three drive partitions: It is advisable to leave OS X installed, as the computer's firmware can only be updated from OS X. Post-install Debian configuration specific for ?MacBooks. It's always good to start from a clean, backed-up and up-to-date install of OS X. You can find the version of a MacBook in the 'About this Mac' menu in OSX, or dmidecode output from Linux. There are several different models with different internal hardwares.

SET UP USB DEVICE FOR SWAP MAC SERIES

MacBook is a series of laptop PCs sold by Apple Inc.

CPU frequency scaling in kernel (customization).CPU frequency scaling in kernel (basics).Mount Linux filesystems (ext3) under Mac OS X.Mount Mac OS X filesystems (HFS+) under Linux.

Set up usb device for swap mac